| Author |
 Topic  |
|
|
Fred
Germany
6 Posts |
 Posted - 23 Feb 2007 : 11:16:08
|
Hello,
it gives thou, it is 1/1000 of an inch, but what is with cm? 1mm is only 1/10 of a centimeter. When i have a trackspace of 5.9thou(150um), the measure gap tells me a space of 0mm. How can i Easy-PC tell to show me the right space of 0.015mm? I often need the metric units.
Fred |
|
|
DavidM
United Kingdom
458 Posts |
Posted - 25 Feb 2007 : 04:25:55
|
Have you checked the 'precision' on the Units dialog? Perhaps this is still set to zero (as it would normally be when working in whole thou).
David Manns
Technical Support
Number One Systems
|
 |
|
|
Fred
Germany
6 Posts |
Posted - 26 Feb 2007 : 05:04:39
|
I have checked the precision. It has normally the value 0, but when Iīm choose 0.1mm as precision, nothing changed in the maesure gap.
Fred |
|
|
|
DavidM
United Kingdom
458 Posts |
Posted - 26 Feb 2007 : 05:17:23
|
Fred,
If the Units are set to mm, with Precision set to 3, I would expect all coordinates (status bar, properties, measure, etc) to show values with three decimal places.
If this is not the case in your design, perhaps you can email the design file to support and we'll take a closer look for you.
David Manns
Technical Support
Number One Systems
|
|
|
|
Fred
Germany
6 Posts |
Posted - 26 Feb 2007 : 05:39:28
|
Ok, thatīs the way it work:-).
It is not so intuitiv to higher a value tho show lower values.
Ok thanx a lot...
Fred |
|
|
| |
Topic |
|
Units