Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Help For Easy-PC Users
 Schematics
 Eagle transfer to v19.0 has problems
Author Previous Topic Topic Next Topic  

neilh

USA
23 Posts

Posted - 12 Nov 2015 :  18:56:50  Show Profile  Reply with Quote
Hi, I'm trying to transfer the Mediakit LinkitOne_V1.0 Eagle schematic files to EasyPc V19 and its not working.,
There are a number of pages on Eagle PC, and when it is read in from the eis - they don't all fit in the EP project. Then when saving as EP.sch and reading back in the result is un-readable with random vertical striations.
The hardware schematic/.brd are here - and require a login.
http://labs.mediatek.com/fileMedia/download/3e75b1e4-abed-479c-afd2-62247ba47243
The initial reference was here
http://www.seeedstudio.com/depot/LinkIt-ONE-p-2017.html - under Resources.

Peter Johnson

United Kingdom
488 Posts

Posted - 13 Nov 2015 :  11:01:47  Show Profile  Visit Peter Johnson's Homepage  Reply with Quote
I've seen the data for import, and the fundamental problem is simply that the original is nearly 2 metres high, which simply can't fit into a 1 metre square working area.

To import this, it's going to be necessary to massage the original to bring the height down to under 1 metre. As the original comprises 13 sheets, most of which are in a single column 10 high, it should be relatively easy to split these into two adjacent blocks of five, bringing the height down to within the limit.
Go to Top of Page

neilh

USA
23 Posts

Posted - 13 Nov 2015 :  20:43:33  Show Profile  Reply with Quote
Interesting - the actual board is arduino size.
Go to Top of Page
  Previous Topic Topic Next Topic  
Jump To: