Number One Systems Forum

All Forums

Schematics

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:

UserName:

Password:

Format Mode:

Format:

Message:

* HTML is OFF
* Forum Code is ON

Check here to include your profile signature.
Check here to subscribe to this topic.

T O P I C R E V I E W
shadders	Posted - 17 Jan 2010 : 20:45:45 Hi, When running a DRC in schematic, it states that there are Schematic Only errors such as the Schmatic Frame (A1, A2, A3), or the FROM/TO compnent. Is this a known bug - i have been through changing the FROM/TO off page connections and the same happens - at least one for Schematic Frame, a FROM and a TO in each schematic. (concerned in case it may affect the translation to PCB) Regards, Richard.
4 L A T E S T R E P L I E S (Newest First)
shadders	Posted - 21 Jan 2010 : 19:31:27 Hi Peter, Thanks - no explicit acronym stated for SO = Schematic Only, but the subject is there. Regards, Richard.
Peter Johnson	Posted - 20 Jan 2010 : 11:35:50 If you've got a schematic open, go to [Tools], [Design Rule Check], and you'll see the option for checking for schematic only parts. With that window open, press <F1> and you'll see that it is mentioned in the help file, though only briefly.
shadders	Posted - 19 Jan 2010 : 09:48:04 Hi Ian, Thanks for the reply. I just wanted to confirm that this was the case - no impact on the PCB. The SO designation is not listed in the Help file. Regards, Richard.
Iain Wilkie	Posted - 18 Jan 2010 : 16:10:37 Not sure what you mean ..... these are schematic only components ... so are being highlighted as such .... they have NO affect on the PCB Iain