| Author |
 Topic  |
|
|
shadders
United Kingdom
224 Posts |
 Posted - 17 Jan 2010 : 20:45:45
|
Hi,
When running a DRC in schematic, it states that there are Schematic Only errors such as the Schmatic Frame (A1, A2, A3), or the FROM/TO compnent.
Is this a known bug - i have been through changing the FROM/TO off page connections and the same happens - at least one for Schematic Frame, a FROM and a TO in each schematic. (concerned in case it may affect the translation to PCB)
Regards,
Richard. |
|
|
Iain Wilkie
United Kingdom
1015 Posts |
Posted - 18 Jan 2010 : 16:10:37
|
Not sure what you mean ..... these are schematic only components ... so are being highlighted as such .... they have NO affect on the PCB
Iain |
 |
|
|
shadders
United Kingdom
224 Posts |
Posted - 19 Jan 2010 : 09:48:04
|
Hi Ian,
Thanks for the reply.
I just wanted to confirm that this was the case - no impact on the PCB. The SO designation is not listed in the Help file.
Regards,
Richard. |
|
|
|
Peter Johnson
United Kingdom
498 Posts |
Posted - 20 Jan 2010 : 11:35:50
|
| If you've got a schematic open, go to [Tools], [Design Rule Check], and you'll see the option for checking for schematic only parts. With that window open, press <F1> and you'll see that it is mentioned in the help file, though only briefly. |
|
|
|
shadders
United Kingdom
224 Posts |
Posted - 21 Jan 2010 : 19:31:27
|
Hi Peter,
Thanks - no explicit acronym stated for SO = Schematic Only, but the subject is there.
Regards,
Richard. |
|
|
| |
Topic |
|
SO Error on DRC