| T O P I C R E V I E W |
| rvpilot |
Posted - 28 Apr 2016 : 08:44:15
Has anyone else noticed that when creating a new part, the Unit Precision is default to zero for both current and alternate units ?? It's caught me out a few times when swapping from thou to mm (50thou grid became a 1mm grid and not 1.27mm)! Even opening up old library part s to edit, unless the precision is 'reset' to a sensible value (e.g. 2 or 3) and the library part is re-saved it defaults to zero!
Do I need to raise this as a bug ... it's not very friendly (or logical) and is gonna cost someone a board revision as is.
I'm using v19.0.4. |
| 2 L A T E S T R E P L I E S (Newest First) |
| rvpilot |
Posted - 28 Apr 2016 : 11:11:46
quote:
Originally posted by Iain Wilkie
In fact I have seen it so often I now automatically set the precision before proceeding.
There are quite a lot of things I seem to do over and over ... it's only when I sit down for a few days and create a batch of new components that you realize how long you spend doing the repetitive 'workarounds' rather than the actual productive stuff!
I'll definitely log it then. |
| Iain Wilkie |
Posted - 28 Apr 2016 : 09:47:51
Yup, I have seen this too. In fact I have seen it so often I now automatically set the precision before proceeding. Should really be reported ..... I did fiddly with things once a long time ago and looked like I had fixed it, but at some point (maybe an update) it returned and I have just learned to live with it.
Report it to No 1
Iain
|
