| Author |
 Topic  |
|
|
siongboon
Singapore
55 Posts |
 Posted - 12 Nov 2012 : 06:32:22
|
Hi,
1) I notice that sometimes the grid dots does not appear.
I can only make it appear when I go to
>settings>grids>
uncheck and then check the checkbox "Grids Visible"
in order for the grid to appear.
2) When I group or move 2 same pad at the same position,
1 on the top copper, 1 on the bottom copper.
When I copy and paste, the objects is invisible.
When I pick and move, it is invisible as well.
I find it difficult to position my pads.
Just to add-on, the error check for collision does not work either when the pads are invisible.
Best Regards,
Siong Boon
Best Regards
Siong Boon
www.siongboon.com |
Edited by - siongboon on 12 Nov 2012 06:35:19 |
|
|
siongboon
Singapore
55 Posts |
Posted - 13 Nov 2012 : 08:04:54
|
I also notice a few times, the copper pour avoid the pads but overlap it's power trace. The copper and trace belongs to a different net. No spoke is generated, and the copper pour overlap as there are no trace around the pad.
Best Regards
Siong Boon
www.siongboon.com |
 |
|
|
DavidM
United Kingdom
458 Posts |
Posted - 14 Nov 2012 : 11:22:31
|
I don't get either of the problems you describe in your first post. My grids are always on as I expect, and moving two pads that are in the same position but on opposite sides of the board will show the pads as they move. Maybe these are both down to something different about your colour settings, so I suggest the best thing to do is to email a small example design file to Support and we'll take a look.
As for the copper pour issue, that would certainly an example design file sent to us, as it is likely to be very data-specific.
David
|
|
|
|
davep
United Kingdom
101 Posts |
Posted - 14 Nov 2012 : 11:42:18
|
My grids are always off when I start a new file.
I have to turn them on and change their colour (I work with colour on a white background) . |
|
|
| |
Topic |
|
Bug on Easy-PC Version 16.0.5