Dear All,
I'm using v15.0.7 and have some problems with my grids.
I use a 50 thou grid as standard (don't know why I chose imperial, but I've stuck with it now) to design my schematics. All my components have been designed in the 50thou grid, i.e. the spacings between pins are 50 thou, sizes of resistors, caps etc are all in multiples of 50 thou.
I recently designed a schematic with a few components (all in 50thou grid) and saved it. When I opened it the next time, some of the connections between the components had shifted and ended up between the two grid lines, it was as if the setting automatically changed to a half-grid and placed the connections and a few components on the half-grid.
Could anyone please help?
Thank you very much in advance
|
Bug when using Schematic Grids
Posted - 13 Aug 2012 : 09:29:08
