I am having problems setting up a custom resist layer. The component has a large pad and I would like to expose two small rectangle areas for copper and paste. I have tried many ways but cannot seem to crack this. Has anybody written a procedure to produce something like this. Thanks
Make the component out of the two pads ("small rectangular areas") and add a closed copper shape ("large pad") as required. The two pads will have paste and no solder resist, the rectangular area will be covered with solder resist (apart from the pads area). The two pads can be electrically connected together in the component editor. Hope this helps.
Custom Resist
Posted - 06 Dec 2011 : 11:15:21
