| Author |
 Topic  |
|
|
dmuenchau
USA
1 Posts |
 Posted - 12 Jan 2011 : 15:38:37
|
When I add a Drill Table to my layout (EasyPC v14.0.3 under Windows 7, 64-bit), the table shows all 16 drill sizes, but uses only 6 different symbol shapes.
Under Drill Ident Setup, I edit the shape and size entries for the symbols and, upon adding the new drill table to my layout, the table once again shows only 6 symbol shapes used. The repeated symbol shape is the one called out in Drill Ident Setup for use with Drill Idents not alreay defined.
If I try to return to Drill Ident Setup, all of my previously modified Drill Ident Table is present along with additional drill sizes (which are duplicates of others in the table) using the default symbol shape and size. At this point, if I try to close the window (clicking Okay), I get a Duplicate Entry error message for each of the automatically added duplicates.
Before I can have my board fabricated, I need to resolve this issue. How do I get unique symbols for all of my drill sizes?
Thanks and
Best Regards,
Dan
Update: This occurs on my old Windows Vista system as well. |
Edited by - dmuenchau on 12 Jan 2011 22:23:47 |
|
|
Iain Wilkie
United Kingdom
1015 Posts |
Posted - 13 Jan 2011 : 09:11:15
|
No sure if this helps but .....
I never use this, all the drill info is created as 2 gerber files when you create your gerbers and this has always been interpreted by the pcb manufacturers correctly.
Iain
|
 |
|
|
Peter Johnson
United Kingdom
498 Posts |
Posted - 22 Feb 2011 : 11:05:19
|
| This is a confirmed bug. The fix will be released in the next patch, but if you'd like a copy in the meantime, please email support requesting the fix. |
|
|
| |
Topic |
|
|
|
Drill Symbol duplication