|
Peter Johnson
United Kingdom
504 Posts |
 Posted - 17 Jun 2009 : 13:16:16
|
1) If you put a "SpiceDevice" value on a component with value "-" (dash), the component will not be included in the spice netlist.
2) If you add a "SpicePowerSymbol" value on a component with the value set to the symbol name of the power gate, spice output knows that the symbol instance using the gate with this symbol is a power gate. The power gate will not be output and pins can be included on the "SpicePinOrder" value that are on the power gate.
This only applies to spice devices of type subcircuit or XSPICE, and should work with any Spice simulator which accepts the normal netlist output. |
|
Forcing Spice to ignore gates
