| Author |
 Topic  |
|
|
mhfm
Switzerland
11 Posts |
 Posted - 15 Oct 2008 : 23:19:50
|
I use custom reports to generate BOM according to my preferences.
To my surprise, the reports cover only the current schematic, not the whole project, nor is there a way to select project.
On the PCB, I get the whole project, but the "Suppress component" switches do not transmit from the schematic.
Besides, is there a way to update the values from the library to the schematics?
Thank you for the support,
Mathias
Mathias Hofmann
mhofmann sagl |
Edited by - mhfm on 22 Oct 2008 09:27:13 |
|
|
Peter Johnson
United Kingdom
498 Posts |
Posted - 20 Oct 2008 : 18:56:37
|
If you generate the reports from the main project file, it will cover all the schematics in the project. Use [Output], [Reports], etc.
|
Edited by - Peter Johnson on 20 Oct 2008 18:57:14 |
 |
|
|
mhfm
Switzerland
11 Posts |
Posted - 21 Oct 2008 : 08:41:48
|
That was my first guess, but I gave up, having no "output" menu on the .prj window (I get "File, Edit, View, Project, Settings, Simulation, Tools, Window, Help").
I succeded by adding a new toolbar and inserting the "reports" icon into it. It is not the first time I have to "mine" for some great feature!
Mathias Hofmann
mhofmann sagl |
|
|
|
Peter Johnson
United Kingdom
498 Posts |
Posted - 22 Oct 2008 : 13:19:32
|
| We've had a number of reports of menu problems like this. Go to [Settings], [Customise], and select the 'Menus' tab. Select each menu in turn from the pull down list, and click on [Reset]. That should restore the defaults correctly. |
|
|
|
mhfm
Switzerland
11 Posts |
Posted - 24 Oct 2008 : 08:47:10
|
That helped. Thank you!
Mathias Hofmann
mhofmann sagl |
|
|
| |
Topic |
|
Custom reports for project