|
UK_Sonics
United Kingdom
3 Posts |
 Posted - 11 Jun 2007 : 09:45:09
|
I have completed a design in 10.0.3 that had a copper pour. The Copper pour area was defined as a Square, inside that square was a "Complex" shape imported from a DXF and a simple "Square" shape using the Add Shape command.
Copper Pour, Complex and Square shape are all on the same layer and all on the same net.
In Version 10.0.3, pour the copper and the Copper Pour, Complex and Square shape regions are filled with copper, in Ver 10.0.7 only the Copper Pour and Square shape are filled. Which one is correct?
-John |
|
Copper Pour EPC 10.0.7
