|
Chris55000
United Kingdom
39 Posts |
 Posted - 05 Oct 2025 : 14:07:11
|
| . . .I need to make a PCB for an old Wharfedale Linton Amplifier that consists of nineteen 0.15" (3.81 mm) edge connection pads, pads 7 and 14 are replaced by a keyway slot in the PCB midway between pads 6 and 8 and 13 and 15, how do I make sure the keyway (which I measured from an old PCB as 38 mil wide) is equally positioned between the pads please? |
|
Aligning pads either side of a PCB Outline Notch?
