| T O P I C R E V I E W |
| ocean_front_view |
Posted - 28 Jun 2011 : 20:20:13
I thought easy pcb had a tool for doing matched trace lengths for use in high speed design. I can't seem to find it, I may be thinking of different layout software. I need to layout some high speed memory and match the length of the traces going to the memory. The best I can see is you can do the properties and get the length for a given trace and manually adjust them.
Thanks David |
| 9 L A T E S T R E P L I E S (Newest First) |
| hodali |
Posted - 13 Aug 2011 : 17:18:03
Benno I use a mechanical cad system called Turbo cad 2D which you can buy on www.turbocad.com . You can buy a cheap old version on pearl.de. I use version 16 at the moment and it costs 29,90 Euros on the website http://www.pearl.de/a-SA5067-3240.shtml?query=turbo+cad .
Kind regrads,
Daniel Hodali
|
| Benno |
Posted - 12 Aug 2011 : 17:30:49
quote:
Originally posted by hodali
I use a cheap mechanical cad system (less than 100 Euro)
Daniell would you be willing to share what software you use for that?
I am looking for a simple 2D Cad software that I can use for assembly drawings etc. Having DXF import and export is great.
Thanks
Benno
|
| hodali |
Posted - 12 Aug 2011 : 14:14:24
I use a cheap mechanical cad system (less than 100 Euro) to enter traces for microwave design and than I import them to Easy-PCB. No need of buying an expensive cad system!
Kind regards,
Daniel Hodali
|
| Peter Johnson |
Posted - 11 Jul 2011 : 18:48:53
It was introduced in V13.
If you can't see it, try going to [Settings], [Customise], select the 'Menu' tab, and reset the menus for 'PCB Design'. That might sort it out. |
| Iain Wilkie |
Posted - 29 Jun 2011 : 13:48:52
It is not listed as a new feature for V14 and I am sure it was introduced in an earlier version ....
Iain |
| johnt |
Posted - 29 Jun 2011 : 12:13:34
I think it may be a new V14 setting Ian. I am interested in this
too and can't find it in V13. So many features and it's always the
one you havn't got that you need.
I wonder if a piece of track could be defined as a component...
---------------------------------
New: Design For Manufacture Forum
http://www.johntech.co.uk/dfm
All visitors welcome. |
| Iain Wilkie |
Posted - 29 Jun 2011 : 08:36:11
Sorry David .... its under "net classes" ... and not sure if this was put in after V12 .... I am using V14
Iain
|
| ocean_front_view |
Posted - 28 Jun 2011 : 20:57:31
Iain: Thanks, could you point me to the min/max you are talking about. Under the "Design Technology"->"Track Styles" I only see options for "Width" in version 12.
David
quote:
Originally posted by Iain Wilkie
Never used it, but you can set min/max in track styles and enable these to be checked in the DRC, if you check the diff lenghts box.
However running the tracks is still a manual process ... it does not do it automatically (yet ??
Iain
|
| Iain Wilkie |
Posted - 28 Jun 2011 : 20:38:31
Never used it, but you can set min/max in track styles and enable these to be checked in the DRC, if you check the diff lenghts box.
However running the tracks is still a manual process ... it does not do it automatically (yet ??
Iain
|
