| T O P I C R E V I E W |
| AJADAM |
Posted - 01 Nov 2016 : 12:06:21
I have a project file with several schematic files linked to one PCB file. However it does not appear to be linked. If I change the schematic and do a integrity check I get the message the designs are the same.
Is it possible to see which files are linked to the PCB file?
|
| 3 L A T E S T R E P L I E S (Newest First) |
| DavidM |
Posted - 01 Nov 2016 : 14:28:47
If you close the PCB, then double-click the PCB item in the Project, does it open the PCB? Conversely, if you close all the files then File|Open the PCB, does it also open the Project?
If the answer to both of those is "yes", then it sounds like your PCB is properly part of the Project. This takes us on to the question of Integrity Check and why it is not thinking your design has changed.
If you still can't work it out, I suggest you zip up the files and email to support@numberone.com for assistance, remembering to let us know which version of software you are using.
David. |
| AJADAM |
Posted - 01 Nov 2016 : 14:10:18
Hi,
I have 9 x *.sch, 1 x *.pcb and 1 x *.prj in the project folder.
I can see all of them in the *.prj window. |
| edrees |
Posted - 01 Nov 2016 : 12:35:04
Hi, in your project folder you should have 3 different types of files;-
*.prj
*.sch
*.pcb.
With the schematic and pcb editor windows closed you should just see the linked files in the *.prj window. Maybe your files are split across different folders? |
